Liste des rappels de sécurité de holiday rambler vacationer 2004
Ces résultats de recherche sont basés sur une recherche YMM et contiennent des informations générales sur les rappels, telles que la date, le numéro, les composants, la description, les communications du fabricant et les coordonnées pour les réparations. Si vous recherchez des informations plus détaillées sur votre véhicule, vous pouvez commander un rapport de véhicule.
holiday rambler vacationer 2004
RÉSUMÉ
CERTAIN MOTOR HOMES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THE FEDERAL IDENTIFICATION TAG IS INCORRECT. THE TAG STATES THE RIM SIZE IS 22.5X6.75G RANGE. THE CORRECT RIM SIZE IS 22.5X7.5F RANGE.
CONSÉQUENCE
Pas de données
REMÈDE
DEALERS WILL REPLACE THE TAG. OWNER NOTIFICATION BEGAN MARCH 11, 2004. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MONACO AT 1-800-685-6545.
REMARQUES
MONACO RECALL NO. R04002.CUSTOMERS CAN CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
RÉSUMÉ
ON CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS AND EQUIPPED WITH GM 8.1L V8 ENGINES, IMPROPER HARDENING DURING THE HEAT TREATMENT PROCESS CAN CAUSE THE FUEL RAIL PULSE DAMPER RETAINER CLIP TO FRACTURE, RESULTING IN INADEQUATE RETENTION OF THE DAMPER. IF THE DAMPER BECOMES LOOSE, FUEL COULD BE PUMPED BY THE FUEL PUMP INTO THE UNDER HOOD AREA.
CONSÉQUENCE
Pas de données
REMÈDE
WORKHORSE IS HANDLING THE OWNER NOTIFICATION AND REMEDY FOR THIS CAMPAIGN (PLEASE SEE 06V225). DEALERS WILL REPLACE THE FUEL RAIL PULSE DAMPER RETAINER CLIPS ON THESE ENGINES FREE OF CHARGE. OWNERS MAY CONTACT WORKHORSE AT 877-294-6773 OR MONACO AT 1-800-685-6545.
REMARQUES
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION’S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
RÉSUMÉ
CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS AND EQUIPPED WITH ACTIA CORPORATE INSTRUMENT CLUSTER FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 101, 'CONTROLS AND DISPLAYS,' AND NO. 105, 'HYDRAULIC AND ELECTRIC BRAKE SYSTEMS.' IF THE BRAKE FAIL INPUT FALLS BELOW A VOLTAGE OF 1.5V, THE BRAKE FAILURE LAMP AND ALARM WILL BE ACTIVATED. ALSO ACTIVATION OF THE ABS TELLTALE WHEN THE ABS IS NOT PROPERLY FUNCTIONING DOES NOT ALWAYS OCCUR.
CONSÉQUENCE
Pas de données
REMÈDE
WORKHORSE IS CONDUCTING THIS RECALL (PLEASE SEE 04V195000) AND WILL REPROGRAM THE INSTRUMENT PANEL CLUSTER FREE OF CHARGE. OWNERS MAY CONTACT WORKHORSE AT 1-877-246-7731 OR MONACO AT 1-800-685-6545.
REMARQUES
CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
